Thickness:0.2mm~12.0mm
Width:600mm-2650mm or customize
Standard: GB/T3880.2–2006
1050 aluminum alloy is formed by adding a small amount of copper to pure aluminum. It has excellent forming characteristics, high corrosion resistance, good weldability and electrical conductivity, and is widely used in products that do not require high strength.
Thickness:0.2mm~12.0mm
Width:600mm-2650mm or customize
Standard: GB/T3880.2--2006
1050 aluminum alloy is formed by adding a small amount of copper to pure aluminum. It has excellent forming characteristics, high corrosion resistance, good weldability and electrical conductivity, and is widely used in products that do not require high strength.
| Chemical Composition | ||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | |
| 1050 | ≤0.25 | ≤0.40 | ≤0.05 | 0.05-0.20 | ≤0.05 | / | / | ≤0.05 | ≤0.03 | / |
| Physical Properties | |
| Property | Value |
| Density | 2.71kg/m³ |
| Melting Point | 650℃ |
| Modulus of Elasticity | 71 GPa |
| Electrical Resistivity | 0.282 x 10-6 Ω.m |
| Thermal Conductivity | 222W/m.K |
| Thermal Expansion | 24 x 10-6/K |
| Physical Properties | |
| Property | Value |
| Density | 2.71kg/m³ |
| Melting Point | 650℃ |
| Modulus of Elasticity | 71 GPa |
| Electrical Resistivity | 0.282 x 10-6 Ω.m |
| Thermal Conductivity | 222W/m.K |
| Thermal Expansion | 24 x 10-6/K |
| Fabrication Response | |
| Process | Rating |
| Workability-Cold | Excellent |
| Machinability | Poor |
| Weldability - Gas | Excellent |
| Weldability - Arc | Excellent |
| Weldability - Resistance | Excellent |
| Brazability | Excellent |
| Solderability | Excellent |
A: We are a manufacturer, can do OEM and ODM.
A: Yes, we have small samples, like A4 size. You need to provide the grade (ALLOY NUMBER) and temper, thickness, width,length and the quantity.
A: Quality is priority. Our factory has gained SGS authentication. We guarantee the goods out form our factory 100% qualified. And each process, we have very strict operation and arrange 2 technicians to inspect. After the products are finished, we will make the last test to pick up the unqualified products.
A: Generally we accept 30% T/T as deposit and 70% against with B/L copy.
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2022 Tianjin Century Changsheng Trade Co., Ltd
