3303 aluminum is a 3000-series aluminum alloy: the main alloy addition is manganese, and it is formulated for primary forming into wrought products. Cited properties are appropriate for the annealed condition. 3303 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-3303. A93303 is the UNS number.
| Product Name | 3303 Aluminum |
| Alloy | 3*** aluminum are alloyed with manganese and can be hardened |
| Temper | H12,H14,H16,H18,H19 etc. |
| Thickness | 0.1mm to 10mm |
| Width | For coil: 600mm ~ 2000mm, or as customize |
| For sheet: 20mm ~ 2200mm, or as customize | |
| Weight/Coil | As the customer's request |
| MOQ | 3 ton |
| Delivery time | Aound 30 days |
| Payment terms | T/T L/C |
| Packing | 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips |
3303 aluminum is a 3000-series aluminum alloy: the main alloy addition is manganese, and it is formulated for primary forming into wrought products. Cited properties are appropriate for the annealed condition. 3303 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-3303. A93303 is the UNS number.
| Chemical Composition % | ||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Ga | Zn | Ti | Residuals | |
| 3303 | ≤0.60 | ≤0.70 | 0.05-0.2 | 1.0-1.5 | 0.2-0.8 | ≤0.05 | / | ≤0.10 | ≤0.10 | ≤0.15 |
| Mechanical Properties | |||||
| Property | Value | ||||
| Tensile Strength | 110 MPa | ||||
| Yield Strength | 39 MPa | ||||
| Elongation | 23% | ||||
| Shear strength | 69 MPa | ||||
A: We are a manufacturer, can do OEM and ODM.
A: Yes, we have small samples, like A4 size. You need to provide the grade (ALLOY NUMBER) and temper, thickness, width,length and the quantity.
A: Quality is priority. Our factory has gained SGS authentication. We guarantee the goods out form our factory 100% qualified. And each process, we have very strict operation and arrange 2 technicians to inspect. After the products are finished, we will make the last test to pick up the unqualified products.
A: Generally we accept 30% T/T as deposit and 70% against with B/L copy.
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2022 Tianjin Century Changsheng Trade Co., Ltd
