5456 aluminum is a 5000-series aluminum alloy: the main alloying addition is magnesium and it is formulated for primary forming into wrought products. 5456 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-5456. AlMg5Mn1 is the EN chemical designation. And A95456 is the UNS number.
| Product Name | 5456 Aluminum |
| Alloy | 5*** aluminum are alloyed with magnesium and derive most of their strength from work-hardening. |
| Temper | H12,H14,H16,H18,H19 etc. |
| Thickness | 0.1mm to 10mm |
| Width | For coil: 600mm ~ 2000mm, or as customize |
| For sheet: 20mm ~ 2200mm, or as customize | |
| Weight/Coil | As the customer's request |
| MOQ | 3 ton |
| Delivery time | Aound 30 days |
| Payment terms | T/T L/C |
| Container | 20ft: 5898mm(L)*2352mm(W)*2393mm(H) Loading 18-25 tons 40ft:12032mm(L)*2352mm(W)*2393mm(H) Loading 25-27 tons |
| Packing | 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips |
5456 aluminum is a 5000-series aluminum alloy: the main alloying addition is magnesium and it is formulated for primary forming into wrought products. 5456 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-5456. AlMg5Mn1 is the EN chemical designation. And A95456 is the UNS number.
| Chemical Composition % | ||||||||||
| Si | Fe | Cu | Mn | Mg | G | Cr | Zn | Ti | Residuals | |
| 5456 | ≤0.25 | ≤0.40 | ≤0.10 | 0.5-1.0 | 4.7 to 5.5 | / | 0.05 to 0.2 | ≤0.25 | ≤0.20 | ≤0.10 |
| Mechanical Properties | |||||
| Property | Value | ||||
| Tensile Strength | 320 to 340 MPa | ||||
| Yield Strength | 150 to 250 MPa | ||||
| Elongation | 11 to 18% | ||||
| Shear Strength | 190 to 210 MPa | ||||
Annealing of Aluminium / Aluminum 5456 alloy can be performed at 343°C (650°F). This should be followed by air cooling.
Aluminium / Aluminum 5456 alloy has good cold working capacity but extensive cold working (over 20% reduction) should be avoided as this causes stress corrosion cracking when temperatures reach 66°C (150°F).
Arc welding is the preferred welding method for Aluminium / Aluminum 5456 alloy, thus making it useful structural applications. Gas welding can also be used but results are not as good as arc welding.
Formability of Aluminium / Aluminum 5456 alloy is more difficult than the other Aluminium / Aluminum alloys. It should not be extensively cold worked.
A: We are a manufacturer, can do OEM and ODM.
A: Yes, we have small samples, like A4 size. You need to provide the grade (ALLOY NUMBER) and temper, thickness, width,length and the quantity.
A: Quality is priority. Our factory has gained SGS authentication. We guarantee the goods out form our factory 100% qualified. And each process, we have very strict operation and arrange 2 technicians to inspect. After the products are finished, we will make the last test to pick up the unqualified products.
A: Generally we accept 30% T/T as deposit and 70% against with B/L copy.
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2022 Tianjin Century Changsheng Trade Co., Ltd
