Thickness:0.2mm~12.0mm
Width:600mm-2650mm or customize
Standard: GB/T3880.2–2006
1100 aluminum is a 1000-series aluminum alloy: it is considered commercially pure, and is formulated for primary forming into wrought products. 1100 is the Aluminum Association (AA) designation for this material. In European standards, it will be given ad EN AW-1100. a91100 is the UNS number. Additionally, the EN chemical designation is Al99,0Cu.
Thickness:0.2mm~12.0mm
Width:600mm-2650mm or customize
Standard: GB/T3880.2--2006
1100 aluminum is a 1000-series aluminum alloy: it is considered commercially pure, and is formulated for primary forming into wrought products. 1100 is the Aluminum Association (AA) designation for this material. In European standards, it will be given ad EN AW-1100. a91100 is the UNS number. Additionally, the EN chemical designation is Al99,0Cu.
| Chemical Composition % | ||||||||||
| Si | Fe | Cu | Mn | Mg | Ga | V | Zn | Ti | Residuals | |
| 1100 | ≤1.0 | ≤1.0 | 0.05-0.2 | ≤0.05 | ≤0.05 | / | / | ≤0.05 | ≤0.03 | ≤0.15 |
| Mechanical Properties | ||||||||||
| Property | Value | |||||||||
| Elastic (Young's, Tensile) Modulus | 69 GPa | |||||||||
| Elongation at Break | 1.1 - 32% | |||||||||
| Fatigue Strength | 32-71 MPa | |||||||||
| Shear Modulus | 26 GPa | |||||||||
| Thermal Properties | ||||||||||
| Property | Value | |||||||||
| Latent Heat of Fusion | 400 J/g | |||||||||
| Maximun Temperature | 180 ℃ | |||||||||
| Melting Completion (Liduidus) | 660 ℃ | |||||||||
| Thermal Conductivity | 220W/m.K | |||||||||
| Thermal Expansion | 24 µm/m-K | |||||||||
| Common Calculations | ||||||||||
| Resilience:Ultimate | 0.76-52 MJ/m³ | |||||||||
| Resilicence: Unit (Modulus of Resilience) | 5.7-170 KJ/m³ | |||||||||
| Stiffness to Weight:Bending | 50 points | |||||||||
| Stiffness to Weight:Axial | 14 points | |||||||||
| Strength to Weight:Bending | 16-25 points | |||||||||
| Strengthto Weight:Axial | 8.7-17 points | |||||||||
| Thermal Diffusivity | 90 mm²/s | |||||||||
| Thermal Shock Resitance | 3.7-7.4 points | |||||||||
1100-H112 is 1100 aluminum in the H112 temper. This temper is actually just a variation on F (as-fabricated) that allows for the possibility of very limited strain hardening or heat treatment, under certain conditions.
It has the second lowest strength and second highest ductility compared to the other variants of 1100 aluminum.
1100-H113 is 1100 aluminum in the H113 temper. This temper is a very specific variation on H112 that only applies to standard tube products.
It has the lowest strength compared to the other variants of 1100 aluminum.
1100-H12 aluminum is 1100 aluminum in the H12 temper. To achieve this temper, this metal is strain hardened to a strength that is roughly a quarter of the way between annealed(O) and full -hard (H18).
1100-H14 aluminum is 1100 aluminum in the H14 temper. To achieve this temper, this metal is strain hardened to a strength that is roughly a quarter of the way between annealed(O) and full -hard (H18).
1100-H16 aluminum is 1100 aluminum in the H16 temper. To achieve this temper, this metal is strain hardened to a strength that is roughly 3/4 of the way between annealed(O) and full -hard (H18).
1100-H18 aluminum is 1100 aluminum in the H18 temper. This is the strongest temper normally produced through the action of only strain hardening.
1100-H22 aluminum is 1100 aluminum in the H22 temper. To achieve this temper, this metal is strain hardened,and then partially annealed, to a strength that is roughly a quarter of the way between annealed(O) and full -hard (H28).
1100-H24 aluminum is 1100 aluminum in the H24 temper. To achieve this temper, this metal is strain hardened,and then partially annealed, to a strength that is roughly halfway between annealed(O) and full -hard (H28).
1100-H26 aluminum is 1100 aluminum in the H26 temper. To achieve this temper, this metal is strain hardened,and then partially annealed, to a strength that is roughly 3/4 of the way between annealed(O) and full -hard (H28).
It has the second lowest ductility compared to the other variants of 1100 aluminum.
1100-H28 aluminum is 1100 aluminum in the H 28 temper. This is the strongest temper normally produced through the action of strain hardening followed by partial annealing. It is closely related to related H18. It has the lowest ductility compared to the other variants of 1100 aluminum.
1100-O aluminum is 1100 aluminum in the annealed condition. It has the highest ductility compared to the other variants of 1100 aluminum.
A: We are a manufacturer, can do OEM and ODM.
A: Yes, we have small samples, like A4 size. You need to provide the grade (ALLOY NUMBER) and temper, thickness, width,length and the quantity.
A: Quality is priority. Our factory has gained SGS authentication. We guarantee the goods out form our factory 100% qualified. And each process, we have very strict operation and arrange 2 technicians to inspect. After the products are finished, we will make the last test to pick up the unqualified products.
A: Generally we accept 30% T/T as deposit and 70% against with B/L copy.
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2022 Tianjin Century Changsheng Trade Co., Ltd
